Close the door of the washing machine. The door report on the display will change to Pr-* (last executed
program). (If Pr does not appear on the display, repeat the door closing operation).
Select the desired program with the program selection keys. The selected program number will be shown on
the display. (To find out the initial content of each program, see Section 5.3.: Content of the washing
programs).
Place the washing products in the dispenser and close the cover.
After pressing the ; key, the temperature value will appear for the washing phase.
The / keys enable the temperature of the program selected to be modified. (This option can be
disabled in the Mod menu (see Section 6.7).
Press the key again to confirm the temperature selected and start the washing program.
Door lock. After giving the start order, a 30-second security time is started during which the drum rotation
and the water inlet operate at short impulses and door remains released. At the end of this time, the locking
mechanism closes and the wash cycle begins.
While the program is running, and depending on the configuration of parameter dt in the Mod, menu, the
display will show the various functions being executed by the washing machine or the time remaining for the
program (see Section 6.7)
Once the program has finished, the door will remain locked until the end of program LED indicator comes on
and the turn and the End report appears on the display.
If the washing temperature has been modified at the start of the program, once the program has finished the
temperature returns to the programmed value.
DOOR FITTED WITH SAFETY LOCK
Never attempt to open the door if:
the program has not finished.
the drum has not come to a complete halt.
the bath has not been completely evacuated.
To Next Page
Loading...
Need help?
General
