GIRBAU LOGI CONTROL User Manual

LOGI CONTROL. Advanced mode 40
Cod. 523340
Rev. 10/1016
6.7. Modifying the operating parameters. Mod menu
The Mod menu allows the user to modify the operation parameters of all the programs.
The modifications carried out from Mod menu affect the eight programs.
6.7.1. Summary table of the changeable parameters
PARAMETER
MODIFICATION OF
OPTIONS
CE
USA
b
Buzzer
b-0
Without buzzer
b-1
Low buzzer
b-2
Normal buzzer


b-3
Strong buzzer
dt
Information on the
display during a
program
dt-0
Functions display


dt-1
Program time remaining display
C / F
Temperature unit
C
Temperature displayed in degrees Celsius

F
Temperature displayed in degrees Fahrenheit

dc
Cleaning the
dispenser
dc-0
Dispenser cleaning NO activated


dc-1
Dispenser cleaning YES activated
AC
Program acceleration
AC-0
Without acceleration permission
AC-1
With acceleration permission


SP
Suds prevention
(note 1)
SP-0
Without suds prevention


SP-1
Suds prevention option enabled
tS
Wash temperature
selection when
starting program
tS-0
Wash temperature selection disabled
tS-1
Wash temperature selection enabled


Pg
Hot water purge
(note 2)
Pg-0
Purge option disabled


P250
Maximum purge time: 250 sec.
Pd
Purge drain
selection.
(note 3)
Pd-2
Purge water outlet via normally opened drain
valve


Pd-3
Purge water outlet via normally closed drain
valve or pump.
Id
Network identifier
Id-0
Disabled communication


Id-1..99
Enabled communication
 Indicates default option following configuration.
Note 1: EH020 models only.
Note 2: Except models HS-6008, RMS610 & EH020.
Note 3: Option available only on models with a double drainage kit installed on the machine and activated on
the configuration menu.

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English