GIRBAU LOGI CONTROL User Manual

LOGI PRO. Operation 47
Cod. 523340
Rev. 10/1016
LOGI PRO. SPECIFIC INFORMATION
7. LOGI PRO. WASH PROGRAMS
The washing machine offers the possibility of selecting from among 25 different washing programs. The first 8
programs are devoted to different types of linen and degrees of soiling. The remaining programs have a single
content in all their phases and are designed for the user to be able to modify them, thereby creating new
programs.
Depending on the AREA OF USE defined in the washing machine SETUP, the original content of the programs
varies.
The original content of the programs is defined as indicated in the charts in Section 7.3.
The content of the programs may be modified; see Chapter 8: ADVANCED USE MODE.
7.1. Main reports that appear on the display
Viewing on the display the parameters that the washer is executing during the washing cycle. Value of the dt-0
parameter in the Mod menu. (Section 8.5).
REPORT
MEANING
LOAd
Determination of load volume.
Pr-*
Program selected. Machine ready to wash
A-1
Cold water inlet
A-2
Hot water inlet
d-*
First dosing
C-**
F***
Water temperature in degrees Celsius or Fahrenheit
rt-*
Rotation time left
c-**
Cooling temperature
PUSH
STAR
Program halt using the rh function
Et-*
Spin time remaining
End
End of program. Door unlocked
door
Washer with door open

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English