GIRBAU LOGI CONTROL User Manual

LOGI CONTROL. Advanced mode 42
Cod. 523340
Rev. 10/1016
6.7.3. Parameter modification sequence
Access to ADVANCED USE MODE. Section 6.2. The display shows Pro.
Press the ▲ key twice. The display shows INFO, Mod successively.
Press key to display the first parameter.
Buzzer
The door safety unlock can be warned by sounding a beep. The duration of this warning is programmable.
OPTIONS
MEANING
b-0
Buzzer OFF
b-1
Low buzzer: two beeps
b-2
Normal buzzer: four beeps
b-3
Strong buzzer: six beeps
The ▲key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Information on the display during a program
Allows the user to select the information to be displayed during the program execution.
If the view functions option is selected, the table in Section 5.1 allows the user to identify the reports on the
display with the functions that the washing machine is executing.
OPTIONS
MEANING
dt-0
Display of functions being executed by the washer
dt-1
Display of the program time remaining in minutes
The ▲ key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Temperature unit
The bath water temperature can be displayed in degrees Celsius or Fahrenheit.
OPTIONS
MEANING
C
Temperature unit in degrees Celsius
F
Temperature unit in degrees Fahrenheit
The ▲key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English