GIRBAU LOGI CONTROL User Manual

LOGI CONTROL. Operation 23
Cod. 523340
Rev. 10/1016
5.2. Interpretation of the program tables
SYMBOL
OPTION
DESCRIPTION

**
Estimated program time
Minimum program time based on a machine with hot water supply and without
heating. Time in minutes.
Ph
**
Phase number
The phase indicated with a grey background belongs to the wash phase.
L
1
2
3
Bath level
Low level
Medium level
High level (units with pumped drain, levels 2 and 3 are the same)
C / F
**
Temperature of the bath
Value in degrees Celsius or Fahrenheit
d
0
1
2
3
4
Dosings
No dosing
Pre-wash dosing
Wash dosing
Bleach dosing
Softener / neutraliser dosing
r
1
2
3
Drum rotation sequence
Vigorous sequence rotation: 25 seconds ON / 5 seconds stop
Normal rotation sequence: 15 seconds ON / 15 seconds stop
Light rotation sequence: 5 seconds ON / 25 seconds stop
rt
**
Rotation time
Value in minutes
c
0
1
Gradual cool down
Option not available
Option available
rh
0
1
Program stop in final rinse (rinse hold)
Option not available
Option available
E
0
1
2
4
6
Bath drain
Access to the next phase without draining in the bath
Drain + wash speed
Drain + positioning speed
Drain + medium spin speed
Drain + high spin speed
Et
**
- - - -
Spin time
Value in minutes
Non programmable function in the phase

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English