GIRBAU LOGI CONTROL User Manual

Program execution mode 20
Cod. 523340
Rev. 10/1016
4.9.1. Delaying a program
 Load the washing machine and close the door.
 Place washing products in the dispenser compartment.
 Select the program to be used and press the key. The dLY report will appear on the display.
 To cancel de dLY option, press the key.
 When dLY is displayed, press the key. The current time will appear on the screen, in hh.mm format
(hours, minutes, using a 24-hour clock).
 The minutes are shown flashing. They can be modified using the / keys.
 Press the button to validate the minutes and start to modify the hours.
 The hours are shown flashing. They can be modified using the / keys.
 Once you have chosen the desired start time, press . The start time and the selected program will
be displayed alternatively.
 To cancel the delay of a program, select and hold button, for five seconds.
4.10. Consultations during a program
Certain washer operating parameters can be consulted while a program is running.
LOGI CONTROL
Sequence of parameters that can be consulted and how they are shown on the display:
dt-0
dt-1
consultable parameter
display
consultable parameter
display
Percentage of load detected
**
Percentage of load detected
**
percentage of water
consumption and dosing used
%**
percentage of water
consumption and dosing used
%**
Note 1. These parameters can only be consulted if the JL function has been activated on the MOD menu
(Section 6.7)
The parameters can be consulted by pressing the key successively while the program is running.

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English