GR SG901
1861000000000
Safety
confidential
A.1.4
3 Protective devices on the Preset Plus feeder
3.1 Fixed guards
Warning – Risk of injury
Start up the press only when all
guards, coverings and parts of the
housing are mounted on the press.
The coverings of the side frames of the Preset Plus
feeder on D.S. and on O.S. are firmly screwed on.
Operate the press only when all guards, coverings
and parts of the housing are mounted on the press.
3.2 Moveable guards
The moveable (electrically interlocked) guards can
be opened by hand to carry out makeready and
maintenance work.
When you open an electrically protected guard while
production is running, the press stops immediately
with the exception of
D the ink fountain roller,
D the water pan roller and the metering roller in
the dampening system, if the dampening sys-
tem guard was not opened.
D the coating pan roller when the guard in front of
the coating pan roller and the metering roller
was not opened.
3.3 Guards on the Preset Plus feeder
1
2
Fig. 3
UTKSG9011809000000000
To Next Page
Loading...
Need help?
General
