GR SG9013085000002000
CP2000 Center
confidential
B.1.6
1.5 Changing the cover guide height later
12345
Job
Name
Feeder/Cover guide, air adjustment
Cover
guide,
air adjustment
1
2
3
5
0.30
4
Fig. 6 Changing the cover guide height later
The cover guide height is set automatically when you
enter the stock thickness in the Job/Printing mate-
rial menu. The Feeder/Cover guide, air adjust-
ment menu enables you to change the cover guide
height later.
1. Press the
Sheet travel
button (Fig. 6/1) in the
banner line. The Paper run menu appears.
2. Press the
Feeder
button (Fig. 6/2). The Paper
run/Feeder menu appears.
3. Press the
Cover guide, air adjustment
button
(Fig. 6/3). The Feeder/Cover guide, air adjust-
ment menu (Fig. 6) appears.
4. Use the arrow keys (Fig. 6/4) to select the cover
guide height in mm. The selected value is dis-
played to the left of the arrow keys.
Maximum cover guide height: 1.90 mm
Minimum cover guide height: Stock thick-
ness + 0.05 mm
5. To exit the menu: Press the
Return
button
(Fig. 6/5), or a button in the banner line.
UTKSG9013008000000000004
To Next Page
Loading...
Need help?
General
