User Manual of Digital Video Recorder
112
click the button to set the full screen as the detection area.
4. Click the icon to start the smart search, and the events occurred in the defined area will be marked as
on the time bar.
6.2.3 Digital Zoom
We use the interface of DS-9000HFI-RT series (unless otherwise stated) as example to describe the following
settings.
Steps:
1. Enter the Playback interface and start the playback. For details, see Chapter 6.1.
2. Click the icon on the playback control toolbar to enter Digital Zoom mode.
3. Click-and-drag the mouse to draw a red rectangle on the window in the lower-right corner of the interface.
And then the image within it will be enlarged up to 16 times.
4. Right-click to exit the Digital Zoom mode.
Figure 6. 29 Draw Area for Digital Zoom
6.2.4 Reverse Playback of Multi-channel
Purpose:
You can play back record files of multi-channel reversely. We use the interface of DS-9000 HFI-RT series
(unless otherwise stated) as example to describe the following settings.
Steps:
1. Enter the Playback interface.
Menu>Playback
2. Check checkbox to select the channel(s) and double-click to select a date on the calendar.
To Next Page
Loading...
Need help?
General