User Manual of Digital Video Recorder
214
11.10 Detecting Bad Sector
Purpose:
You can detect the bad sector of the HDD to check the status of the HDD.
This chapter is not available for DS-9100/9000HFI-RT series.
Steps:
1. Enter the Bad Sector Detection interface.
Menu > Maintenance > HDD Detect > Bad Sector Detection
Figure 11. 32 Bad Sector Detection
2. Select a HDD and choose Full Detection or Key Area Detection as the detection type.
3. Click Detect to start detecting.
Figure 11. 33 Bad Sector Detecting
4. You can click Pause to pause the detection and click Resume to resume the detection.
5. If there is error information about the HDD, you can click Error info to view the information.
To Next Page
Loading...
Need help?
General