User Manual of Digital Video Recorder
144
8.4 Detecting Video Loss
Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface and select a channel you want to detect.
Menu> Camera> Video Loss
Figure 8. 17 Video Loss Settings Interface
2. Set handling method of video loss.
Check checkbox to enable video loss alarm, and click to set handling method of video loss.
3. Set arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day. Set up arming schedule
of other days of a week. You can also use Copy to copy an arming schedule to other days. Click Apply to
save the settings.
Time periods cannot be repeated or overlapped.
Figure 8. 18 Set Arming Schedule of Video Loss
4. Select Linkage Action tab to set up alarm response action of video loss (please refer to Chapter 8.7).
Click Apply to save the settings and click OK to complete the video loss settings of the channel.
To Next Page
Loading...
Need help?
General