User Manual of Digital Video Recorder
203
11.4 Managing HDD Group
11.4.1 Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced > Storage Mode
2. Set the Mode to Group, as shown below.
Reboot the device to activate the new settings.
Figure 11. 14 Storage Mode Interface for DVR Series
Figure 11. 15 Storage Mode Interface for HDVR Series
IP Camera is supported by HDVR series only.
3. Click Apply and the following Attention box will pop up.
Figure 11. 16 Attention for Reboot
4. Click Yes to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
Menu > HDD > General
To Next Page
Loading...
Need help?
General