User Manual of Digital Video Recorder
162
Device Domain Name: It refers to the Device Domain Name on the device or the Device
Name on the HiDDNS server you created.
User Name: Enter the user name of the device. By default it is admin.
Password: Enter the password of the device. By default it is 12345.
Figure 9. 17 Access Device via iVMS4200
5. Click Apply to save and exit the interface.
9.2.3 Configuring NTP Server Settings
Purpose:
A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of system
date/time.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the NTP tab to enter the NTP Settings interface.
Figure 9. 18 NTP Settings Interface
3. Check checkbox to enable NTP.
4. Configure the following NTP settings:
Interval: Time interval between the two synchronizing actions with NTP server. The unit is minute.
NTP Server: IP address of NTP server.
NTP Port: Port of NTP server.
5. Click Apply to save and exit the interface.
The time synchronization interval can be set from 1 to 10080min, and the default value is 60min. If the device is
connected to a public network, you should use a NTP server that has a time synchronization function, such as
the server at the National Time Center (IP Address: 210.72.145.44). If the device is setup in a more customized
To Next Page
Loading...
Need help?
General