User Manual of Digital Video Recorder
178
9.4.2 Exporting Network Packet
Purpose:
By connecting the device to network, the captured network data packet can be exported to USB-flash disk,
SATA/eSATA DVD-R/W and other local backup devices.
Dual NIC is not supported by DS-7200HWI-SV series. We use the interface of DS-9100HFI-ST series (unless
otherwise stated) as example to describe the following settings.
Steps:
1. Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab to enter the Network Detection interface.
3. Select the backup device from the drop-down list of Device Name.
Click Refresh if the connected local backup device cannot be displayed. When it fails to detect the backup
device, please check whether it is compatible with the device. You can format the backup device if the
format is incorrect.
Figure 9. 51 Export Network Packet
4. Click Export to start exporting.
5. After the exporting is complete, click OK to finish the packet export.
Figure 9. 52 Packet Export Attention
Up to 1M data can be exported each time.
To Next Page
Loading...
Need help?
General