User Manual of Digital Video Recorder
79
5.5 Configuring Manual Recording and
Continuous Capture
Purpose:
Follow the steps to set parameters for the manual recording and continuous capture. Using manual recording and
continuous capture, you need to manually cancel the record and capture. The manual recording and manual
continuous capture is prior to the scheduled recording and capture.
Steps:
1. Enter the Manual settings interface.
Menu> Manual
Or press the REC/SHOT button on the front panel.
Figure 5. 28 Manual Record for DVR Series
Figure 5. 29 Manual Record for HDVR Series
IP Camera is supported by HDVR series only.
2. Enable manual record
1) Select Record tab on the left bar.
2) Click the status button before camera No. to change to .
3. Disable manual record.
Click the status button to change to .
After rebooting, all the manual records enabled will be canceled.
4. Start all-day normal recording or all-day motion detection recording of all channels.
1) Click for or .
To Next Page
Loading...
Need help?
General