User Manual of Digital Video Recorder
174
Figure 9. 42 Email Testing Attention
9.2.14 Virtual Host Settings
Purpose:
You can directly get access to the IP camera management interface from the HDVR management interface.
The Virtual host function is only supported by the HDVR series.
You can only configure the virtual host settings through the web browser.
Steps:
1. Enter the Advanced settings interface.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 9. 43 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host.
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of HDVR. The Connect column appears on the right-most side
of the camera list.
Configuration > Remote Configuration > Camera Management > IP Camera
Figure 9. 44 Accessing IP Camera
5. Click the link to go the management page of the selected IP camera.
To Next Page
Loading...
Need help?
General