User Manual of Digital Video Recorder
30
2.1 Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the device has loaded.
Figure 2. 1 Start Wizard Interface
Operating the Setup Wizard:
1. The Start Wizard can walk you through some important settings of the device. If you don’t want to use the
Start Wizard at that moment, click Exit. You can also choose to use the Start Wizard next time by leaving
the “Start wizard when device starts?” checkbox checked.
2. Click Next on the Wizard window to enter the Login window.
Figure 2. 2 Login Window
3. Enter the admin password. By default, the password is 12345.
4. Optionally, to change the admin password, check the New Admin Password checkbox. Enter the new
password and confirm the password in the given fields.
5. Click Next to enter the date and time settings window.
To Next Page
Loading...
Need help?
General