User Manual of Digital Video Recorder
85
5.8 Configuring HDD Group for Recording
and Capture
Purpose:
You can group the HDDs and save the record files and captured pictures in certain HDD group.
Steps:
1. Enter HDD setting interface.
Menu > HDD
Figure 5. 41 HDD General
2. Select Advanced on the left bar.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,
please refer to Chapter 11.4 Managing HDD Group.
3. Select General in the left bar and click to enter editing interface.
4. Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click Apply and then in the pop-up message box, click Yes to save your settings.
3) Click OK to back to the upper level menu.
Repeat the above steps3-4 to configure more HDD groups.
5. Choose the channels of which you want to save the record files and captured pictures in the HDD group.
1) Select Advanced on the left bar.
Figure 5. 42 HDD Advanced for DVR Series
Figure 5. 43 HDD Advanced for HDVR Series
To Next Page
Loading...
Need help?
General