User Manual of Digital Video Recorder
240
• Guest: The Guest user has permission of Local Log Search in Local Configuration, Remote Log
Search in Remote Configuration and only has the local/remote playback in the Camera Configuration.
User’s MAC Address: The MAC address of the remote PC which logs onto the device. If it is configured
and enabled, it only allows the remote user with this MAC address to access the device.
4. Click OK to save the settings and go back to the User Management interface. The added new user will be
displayed on the list.
Figure 14. 8 Added User Listed in User Management Interface
5. Select the user from the list and then click the button to enter the Permission Settings interface.
Figure 14. 9 User Permission Settings Interface for DVR Series
Figure 14. 10 User Permission Settings Interface for HDVR Series
To Next Page
Loading...
Need help?
General