User Manual of Digital Video Recorder
28
• Take 2: By operating the front panel (not available for 7200 series)
1. Press and hold the POWER button on the front panel for 3 seconds.
2. Enter the administrator’s username and password in the dialog box for authentication.
3. Click the Yes button.
Do not press the POWER button again when the system is shutting down.
If you disable the ID Authentication in General Settings interface (Chapter 14.2), the dialog box for
authentication does not pop up.
Rebooting the device
In the Shutdown menu (Figure 1.7), you can also reboot the device.
Steps:
1. Enter the Shutdown menu by clicking Menu > Shutdown.
2. Click the Logout button to logout the device or the Reboot button to reboot the device.
To Next Page
Loading...
Need help?
General