EasyManuals Logo
Home>Hisense>Switch>HYJ-J01H

Hisense HYJ-J01H User Manual

Hisense HYJ-J01H
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
1. Depress the "ZONE" switch.
Every time the "ZONE" switch is depressed, the zone and group
No. to be controlled is changed in the order as shown below.
When the zone is changed, the setting target group is AA (All
Groups) initially.
For example, depressing "ZONE" switch when the setting target
is 1-02, the indication is changed to 2-AA.
2. Depress the "GROUP" switch.
Every time the "GROUP" switch is depressed, the zone and
group No. to be controlled is changed in the order as shown
below. In case of "AA", all the units are controlled
simultaneously.
9. Operation Procedure
A. Setting Target Selection and Monitoring Operation Status
Preparation 1
Supply power to the unit.
ATTENTION:
A. Supply power to the unit more than 6 hours before unit operation for compressor protection.
B. Do not cut off power during the term of using air conditioner.
Preparation 2
After the preparation for air conditioner operation is completed,
turn ON the power supply of the central station.
The setting target zone and group No. is
indicated on the liquid crystal display.
Group No. is changed.
(ex. In case of selecting Zone 3, group 5)
Only Group Nos. Already Set
are indicated.
ZONE GROUP ZONE GROUP
ZONE GROUP ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
ZONE GROUP
A-AA 1-AA 1-01 1-02 1-16
A-AA 2-AA 2-01 2-02 2-16
A-AA 3-AA 3-01 3-02 3-16
A-AA 4-AA 4-01 4-02 4-16
The central station can control up to 64 groups by each group, each zone or simultaneously .
( The selected setting target can be operated and the unit operation status can be monitored.)
ATTENTION:
When changing the zone No. by depressing the "ZONE" switch, the zone, which is not set as group, is not indicated.
The group number is changed by depressing the "GROUP" switch. The group without group setting is not indicated.
Zone No. is changed.
(ex. In case of All group in Zone 3)
Only Zone No. Already Set are indicated.
A-AA 1-AA 2-AA 3-AA 4-AA
HYJE-D02H
138

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense HYJ-J01H and is the answer not in the manual?

Hisense HYJ-J01H Specifications

General IconGeneral
BrandHisense
ModelHYJ-J01H
CategorySwitch
LanguageEnglish

Related product manuals