EasyManuals Logo
Home>Hisense>Switch>HYJ-J01H

Hisense HYJ-J01H User Manual

Hisense HYJ-J01H
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background imageLoading...
Page #183 background image
HISENSE cannot anticipate every possible circumstance that might
involve a potential hazard.
DO NOT pour water into the central controller. This
product is equipped with electrical parts. If poured, it will
cause a serious electrical shock.
DO NOT install the indoor unit, outdoor unit, central
controller and cable within approximately 3 meters from
strong electromagnetic wave radiators such as medical
equipment. In case that the central controller is installed in a
place where there is electromagnetic wave radiation, shield
the controller and cables by covering with the steel box and
running the cable through the metal conduit tube.
In case that there is electric noise at the power source for
the indoor unit, provide a noise filter.
Use specified cables to connect between indoor unit and
remote control switch. Selecting incorrect cables may lead
to fire or electrical shock.
DO NOT install the indoor unit, outdoor unit, central
Controller and cable at such places as:
Where there is oil vapor and the oil is dispersed.
Where the hot springs are near (in a sulfuric environ-
ment).
Where generation, flowing, staying or leaking of
flammable gas is detected.
Where the sea is near (in the salty environment).
A place with humid atmosphere or there is possibility of
water wetting.
A place of poorly ventilated.
An acid or alkaline environment.
DO NOT perform installation work and electrical wiring
Connection by yourself. Contact your HISENSE distributor
or dealer and ask them for installation work and electrical
wiring by service person.
DANGER
The installer and system specialist shall comply with local
regulations or standards for the safety. The following
standards may be applicable, if local regulations are not
available. International Organization for Standardization,
ISO5149 or European Standard, EN378.
If you have any questions, contact your HISENSE distributor or dealer.
Perform electrical work according to the Installation Manual.
As for the electrical wiring work and check, turn OFF the
main power supply before opening/closing the service cover
of indoor unit. If service cover is opened with main power
supply left on, it may result in an electrical shock.
This manual should be considered as a permanent part of
the air conditioning equipment and should remain with the
air conditioning equipment.
This appliance must be used only by adult and capable
people, having received the technical information or
instructions to handle this appliance properly and safely.
Children should be supervised to ensure that they do not
play with the appliance.
Important: read and understand this manual before using
this controller.
CAUTION
NOTE
1 SAFETY SUMMARY
HYJM-S01H
174

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense HYJ-J01H and is the answer not in the manual?

Hisense HYJ-J01H Specifications

General IconGeneral
BrandHisense
ModelHYJ-J01H
CategorySwitch
LanguageEnglish

Related product manuals