Honeywell Enhanced Micro TDC 3000 User Manual

Enhanced Micro TDC 3000 User’s Manual 1-3 9/95
1.1
1.1 GENERAL DESCRIPTION
The Enhanced Micro TDC 3000 Control System consists of two cabinets (also called
"towers") which together contain the electronics, two cartridge disk drives, and a history
module. The cabinet electronics support up to four color monitors, four keyboards, and
optional touchscreens or trackballs. A printer is also connected to the system.
Two electronics modules, one housed in each tower, provide all of the electronics for the
Enhanced Micro TDC 3000 Control System (excluding peripherals). These modules,
called Multinode Modules, are each capable of holding four TDC 3000 Nodes.
Although the Advanced Process Manager (APM) is part of the Enhanced Micro TDC 3000
Control System, it is not described in this manual. See subsection 1.5 for a list of
publications that discuss the Advanced Process Manager and the Universal Control
Network (UCN).
Figure 1-2 is a representation of some of the nodes used to construct a sample Enhanced
Micro TDC 3000 Control System.
Application
Module
Optional
Universal
Stat
i
o
n
RIGHT TOWER
LEFT TOWER
Network Interface
Module
History
Module
Universal
Station
UNIVERSAL
CONTROL NETWORK
Optional Redundant
Network Interface
M
odu
l
e
LCN
54120
620 LCS
Optional
Enhanced
Programmable
Logic Controller
Gateway
Optional
Computer
Gate
w
ay
(Example)
DEC VAX
(Example)
Advanced Process
Manager
Figure 1-2 — Typical Enhanced Micro TDC 3000 Control System

Honeywell Enhanced Micro TDC 3000 Specifications

General

Brand	Honeywell
Model	Enhanced Micro TDC 3000
Category	Controller
Language	English