INTRODUCTION EXCEL CARE CONTROL ICONS
74-5577–33 (US) 14
EN2B-0184 GE51 R0518 (Europe)
Control Icon Table (Excel Web / Excel Web II)
This chapter lists icons alphabetically by function name and includes function
names, the previous function name, in which folder it can be found, and short
descriptions. Function name is usually the same as the icon name.
Returns the absolute value.
Legacy RACL function: Adapts the slope S of
the heating curve for the determination of the
flow temperature setpoint to the building
characteristics.
AND output becomes TRUE(1) if all inputs
are TRUE(1). NAND output is the inverted
AND output.
Calculates the arcus cosinus function of X.
Calculates the arcus sinus function of X.
Calculates the arcus tangens function of X.
Calculates the average of input values.
Cascade controller that acts as a PI
controller with a master and cascade
controller.
Compares two analog inputs (A and B).
Calculate the cosinus function of X in rad.
Increments the output Y by 1 when input "X"
changes from 0 to 1. The counter is set to 0,
when "Reset" input becomes TRUE (1).
Outputs an alternating value.
Returns the decimal places value of the input
Switch-on delay of input A to Y. if input "A" is
unequal to "B" within delay time, then Alarm
output = TRUE (1).
Calculates the dewpoint temperature from
To Next Page
Loading...
Need help?
General
