Honeywell EXCEL 5000 User Manual

INTRODUCTION EXCEL CARE CONTROL ICONS
74-5577–33 (US) 18
EN2B-0184 GE51 R0518 (Europe)
Function Name
Previous Function name
Folder
Description
Sinus
Arithmetic
Calculate the sinus function of X in rad.
Split
Misc
Splits the input into multiple outputs. Result
for a split into 3 outputs: Y3 = (((X-Y1) / P1) -
Y2) / P2) modulo P3.
Square root
Arithmetic
Calculates the square root.
Subtraction
Minus
Arithmetic
Subtracts the sum of S inputs from the input
value M.
Switching Table
Logic
Switching logic module
Time Counter
Timer
Counts the runtime of the input signal.
Timer Value
RTIM
Timer
Legacy RACL function "RTIM": Counts the
time in seconds. Can be reset by the "Reset
Timer" function.
Truncate
Arithmetic
Truncates the decimal places (3.1 => 3, -3.1
=> -3).
Tuncos
Misc
Provides time until next change of state
information from schedule for the connected
input.
Value Ramp
Misc
Defines the slope by which the output will
follow the input.
Value Ramp2
(Excel Web II with OS
3.00.00 or higher only)
Misc
Defines the slope by which the output will
follow the input.
WIDO
Legacy XL500
Legacy RACL function: Checks if the input
value is within the range between minimum
and maximum.
Write Global
Reg.
(Excel Web II with OS
3.00.00 or higher only)
Misc
Writes a value to a global register.
Write Priority
(Excel Web II with OS
3.00.00 or higher only)
Misc
Write the value of an input with a defined
priority to an output which must be connected
with the present value of a datapoint.
X root Y
Arithmetic
Calculates X to the root of Y.
X^2
Arithmetic
Calculates X * X.
X^Y
Arithmetic
Calculates X to the power of Y.
XOR Table
Logic
XOR output becomes TRUE (1) if exactly
one input is TRUE(1). XNOR output is the
inverted XOR output.
ZEB
Zero Energy Band
Energy management
Divides a specified range into Heating range,
Zero energy band and Cooling range.

Honeywell EXCEL 5000 Specifications

General

Brand	Honeywell
Model	EXCEL 5000
Category	Control Systems
Language	English