Honeywell EXCEL 5000 User Manual

EXCEL CARE CONTROL ICONS INTRODUCTION
17 74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)
Function Name
Previous Function name
Folder
Description
Odd Parity
Logic
Compares binary values and returns TRUE
(1), if the number of TRUE (1) elements are
odd.
On-Board DI
Misc
Read on-board digital input.
On-Board DO
Misc
Write on-board digital output.
On/Off Delay
Timer
Switch On- and Off delay of input A to output
Y.
OR
Logic
OR output becomes TRUE(1) if at least one
input is TRUE(1). NOR output is the inverted
OR output.
PID
PID controller
Legacy XL500
Legacy RACL function: PID-Controller that
generates a signal depending on the
deviation of the controlled variable from the
reference variable.
PID Plus
PID controller
Controller
PID-Controller that generates a signal
depending on the deviation of the controlled
variable from the reference variable.
POL
POLYNOMIAL
Legacy XL500
Legacy RACL function: Calculates the
polynomial.
Ramp
Misc
Calculates the output value in relation to the
input, depending on a pre-defined graph.
Random
Misc
Returns a random value in a range between
lower and upper limit.
Read Global
Req.
(Excel Web II with OS
3.00.00 or higher only)
Misc
Reads values from global registers
Read Priority
(Excel Web II with OS
3.01.00 or higher only)
Misc
Returns the value of the highest valid priority
in the priority array
Read Priority
Value
(Excel Web II with OS
3.02.00 or higher only)
Misc
Reads the selected priority of the datapoint
Reset Timer
Timer
Resets the timer of a "Timer value" function.
Round
Arithmetic
Rounds the input value to the next integer
value.
Round down
Arithmetic
Rounds the input value down to the next
integer value (3.1 => 3, -3.1 => -4).
Round up
Arithmetic
Rounds the input value up to the next integer
value (3.1 => 4, -3.1 => -3).
RS flip-flop
Misc
Sets the output to TRUE(1) if the "SET" input
is TRUE(1) until the "RESET" input becomes
TRUE(1).
SET
SET
Legacy XL500
Legacy RACL function: Set the output
depending on the comparison of the inputs.
Y=FALSE(0) if A < B Y=TRUE(1) if A > B Y is
not changed if A = B.
Sequence
Misc
Calculates three output values in relation to
the input, depending on pre-defined graphs.

Honeywell EXCEL 5000 Specifications

General

Brand	Honeywell
Model	EXCEL 5000
Category	Control Systems
Language	English

Summary

Introduction to Control Icons

Control Icon Operation

Explains how control icons function, including internal parameters and I/O dialog boxes.

Control Icon Table

Provides a list of control icons with their names, symbols, and brief descriptions.

Alphabetic Reference of Control Icons

Absolute (Excel Web / Excel Web II) Icon

Describes the Absolute control icon, its function, and I/O.

Addition / ADD Icon

Details the Addition/ADD control icon for summing input values.

ADH2 (Excel Web / Excel Web II) Icon

Explains the ADH2 control icon for legacy RACL heating curve slope calculation.

Analog Switch / SWI Icon

Describes the Analog Switch/SWI icon for switching analog values based on digital input.

AND (Excel Web / Excel Web II) Icon

Details the AND control icon for logical AND operations.

Arcus Cosinus Icon

Describes the Arcus Cosinus control icon for calculating arcus cosinus function.

Arcus Sinus Icon

Describes the Arcus Sinus control icon for calculating arcus sinus function.

Arcus Tangens Icon

Describes the Arcus Tangens control icon for calculating arcus tangens function.

Average / AVR Icon

Explains the Average/AVR control icon for calculating average of analog inputs.

Cascade / CAS Icon

Describes the Cascade/CAS control icon for master and secondary PI control.

Cascade Plus / CAS Icon

Details the Cascade Plus/CAS icon with integral action enable/disable input.

Changeover Switch / CHA Icon

Describes the Changeover Switch/CHA icon for passing analog values based on digital input.

Compare 2 Icon

Explains the Compare 2 icon for comparing two analog inputs.

Comparison Icon

Describes the Comparison icon for comparing two analog inputs.

Cosinus Icon

Describes the Cosinus icon for calculating the cosinus function of X.

Counter Icon

Describes the Counter icon for incrementing output based on input changes.

Cycle / CYC Icon

Explains the Cycle/CYC icon for outputting a digital value on a cyclic basis.

Data Transfer / IDT Icon

Decimal Places Icon

Delay Icon

Dewpoint Icon

Differential Icon

Digital Switch / 2PT / Hysteresis Icon

Division Icon

Duty Cycle / DUC Icon

Economizer / ECO Icon

Fixed Applications (XFM)

Introduces Extended Function Modules (XFMs) for additional control strategy functionality.

ENHANCED PID Icon

Describes the ENHANCED PID icon with advanced PID features.

ENTHALPY Icon

FLOW CALCULATION Icon

LEAD-LAG Icon

Power Demand Control XFMs

Details Power Demand Control XFMs for energy consumption management.

XFM 35 Description

Provides a description of the XFM 35 strategy program for load optimization.

XFM 35 General Functions

Lists general functions provided by the XFM 35 for load optimization.

XFM 35 Algorithms

Details the Sliding Window, Ideal Curve, and Extrapolation algorithms used by XFM 35.

Sliding Window Algorithm

Ideal Curve Algorithm

Extrapolation Algorithm

Switching Behavior of Loads in a Priority Group

XFM 36-1 Description

Provides a description of XFM 36-1, 36-1S, and 36-1R single-stage load programs.

RM Functions

XFM 36-1 General Functions

XFM 36-1/S Sequential Load Switching

Details sequential load switching based on rank within priority groups.

XFM 36-1/R Rotational Load Switching

Describes rotational load switching based on ON/OFF duration for XFM 36-1/R.

HC (Excel Web / Excel Web II) Icon

Heating Curve with Adaptation / HCA Icon

Explains the HCA icon for adaptable heating compensation curve calculations.

Humidity and Enthalpy / H,X Icon

Integral (Excel Web / Excel Web II) Icon

J-K Flip Flop Icon

Last Value Icon

Linear Converter Icon

Limit Icon

Ln Icon

Logic Counter Icon

Mathematical Editor / MAT

Describes the Mathematical Editor for creating formulas to modify control icon inputs.

Formula Entry Procedure

Maximum / MAX Icon

Merge Icon

Minimum / MIN Icon

Monoflop Icon

Modulo Icon

Multi-Switch In Icon

Multi-Switch Out Icon

Multiplication Icon

Negate Icon

Next Schedule Icon

Night Purge / NIPU Icon

NOT Icon

Odd Parity Icon

On-Board DI Icon

On-Board DO Icon

On/Off Delay Icon

Optimum Start/Stop / EOH Icon

Describes the EOH icon for optimizing heating plant start/stop and supply water setpoint.

Adapted Heating Curve for EOH

EOH Operating Procedures

Heating Optimization WITHOUT Room Sensor

Explains heating optimization using outdoor air temperature, without a room sensor.

Cool-Down Optimization WITH Room Sensor

Describes cool-down optimization considering room temperature and sensors.

Adaptation of Optimization

Optimum Start/Stop / EOH3 Icon

Describes the EOH3 icon for optimizing heating plant and supply water setpoints.

Minimum Room Temperature Protection

Variable Time Preheat

Cool-Down Optimization WITHOUT Room Sensor

Explains cool-down optimization based on outdoor air temperature.

Optimum Start/Stop Energy Optimized Ventilation / EOV Icon

Describes the EOV icon for optimizing start/stop of air conditioning systems.

Optimized Shutdown in the Cooling Mode

OR Icon

PID Controller / PID Icon

Describes the PID Controller/PID icon for analog output regulation.

PID Operation

PID Plus Controller / PID Icon

Describes the PID Plus Controller/PID icon with an additional digital input.

Random Icon

Ratio / RAMP Icon

Read Global Reg. Icon

Read Priority Icon

Read Priority Value Icon

Read / RIA Icon

Reset Timer Icon

Round Icon

Round down Icon

Round up Icon

RS flip-flop Icon

Sequence / SEQ Icon

SET Icon

Sinus Icon

Split Icon

Square Root Icon

Subtract / DIF Icon

Switching Table Icon

Tangens Icon

Time Counter Icon

Timer Value Icon

Tuncos Icon

Truncate Icon

Value Ramp Icon

Value Ramp2 Icon

WIDO Icon

Write Global Reg. Icon

Write Priority Icon

Write / WIA Icon

X root Y Icon

X^2 Icon

X^Y Icon

XOR Table Icon

ZEB Icon

Describes the ZEB icon for determining setpoints for comfort bands.

Examples of Control Applications

Attenuator Example

Average Value Calculation Example

Floating Limits and Alarm Suppression

Discusses adapting sensor limits and suppressing nuisance alarms.

Operating Pump Switchover

Switches pump operation between two pumps based on operating hours.

Optimized Start/Stop

Optimizes start/stop times for air conditioning systems to save energy.

Positioning Signal Limitation

Limits the range of output values sent to a positioning signal.

Setpoint Adjustments

Adjusts setpoints for Time Programs based on operating modes.

System Regulation

Regulates partial air conditioning systems using ZEB and PID controllers.

Trend Buffer Control