INTRODUCTION EXCEL CARE CONTROL ICONS
74-5577–33 (US) 16
EN2B-0184 GE51 R0518 (Europe)
Copies the input to all outputs.
Calculate the integral (sum) of the input
Toggles an output depending to the set, clear
command and clock conditions
Provides the current value and the value of
Limits input X to a range between minimum
Legacy RACL function: Calculates the linear
Converts an input value within definable
limits to an output value
Calculates the natural logarithm.
Compares binary values. Returns in output
N(1) the number of TRUE(1) values and in
output N(0) the number of FALSE(0) values.
Returns the highest value of all inputs.
Merges multiple inputs to a combined output.
Result for 4 inputs: Y = X1 + X2*P1 +
X3*P1*P2 + X4*P1*P2*P3
Returns the lowest value of all inputs.
Calculates the remainder of the division A by
Sets the output to TRUE (1) for the time
defined in the parameter "signal time".
Multiplies the input values.
Conditional Switch. Switches the value of a
specified input to the output, depending on
the "Sel X" input.
X input is copied to the output selected by
the "Sel Y" input. The parameter defines if
the other outputs are left unchanged or set to
0.
Negates the analog input value
Reads the next scheduled value and the time
until the value changes from the schedule
Starts and stops ventilation systems to
precondition rooms when cold outside air is
available during nighttime.
Negates the binary input value.