Access Control [69] Galaxy Flex Installer Manual
178
Access Control [69]
The Access Control system is a complete security system. You can choose the type of access
control to use: either the MAX
4
or the door control module or both.
Access Control menu
69 = Access Control
1 = Mode
0 = Disabled
1 = Enabled
2 = MAX
1 = MAX Address A/B to select line
ent to start MAX search
0 = Online,
ent
then key 0 - 7 to readdress MAX
1 = Standalone
2 = MAX Parameters A/B to move to required MAX address
MAX XXX (select) # to display MAX address graphic
ent to select:
1 = Descriptor # = toggle upper case, lower case or
library text
* = delete last character
A/B = move to character/word
ent = assign character/word
esc = save programming
2 = Relay Duration 1 - 60 seconds (default = 05)
3 = Open Timeout 0 - 60 seconds (default = 10)
4 = Groups
1 = Alarm Group
2 = Group Restrict
3 = Exit group
5 = Emergencies Enable or disable option. If group mode is
enabled, a separate enable is available for
each group.
6 = Security
1 = Nightlock 0-4 weekly schedules
2 = Unlock Time 0-4 weekly schedules
3 = Dual Mode
0 = Disabled
1 = Card and Card
2 = Card and Pin
4 = Dual Time Option not available
7 = Menu Recall
1 = Menu Function (** = not used)
2 = Menu Mode 1 = Card Held
3 = Keypad ** = Keypad
# = enable/disable
Continued on next page
To Next Page
Loading...
Need help?
General
