Parameters [51] Galaxy Flex Installer Manual
70
Engineer 1 options
Parameters [51]
Use this option to modify the system functions.
Use A or B to select an option, or enter the two digit parameter number and press ent.
Use A to increase, or B to decrease, the values assigned to the parameter.
Press ent to accept a new value and return to the previous menu level. Any parameters that
differ from this procedure are indicated in the following paragraphs.
Assigning Parameters to Groups
Some parameters allow separate values to be assigned to system groups. If groups have been
enabled, the relevant parameters prompt for a group to be selected. When selected, the value
is assigned to the group parameter.
To Next Page
Loading...
Need help?
General
