Timer Control [45] Galaxy Flex Installer Manual
60
Group Mode
If group mode is enabled (refer to Group Mode [63.1]), there is a separate trace for the
most recent alarm activation in each of the groups. On selecting the Trace option, a user
with group choice (refer to Codes [42]) can view the trace of the assigning groups.
Press the number of the group to be displayed. The N below the selected group changes to a
Y, and then press ent.
If more than one group is selected, or the user does not have group choice, then the trace for
the group with the most recent alarm activation is displayed.
Timer Control [45]
Timer control menu
45 = Timer Control
1 = View
1 = Weekly Sched.
2 = Timer Outputs
3 = Autoset
2 = Holidays
1 = Modify Dates
2 = Assign Groups
3 = Timers – Status 0 = Off, 1 = On (if Timer Access [51.43] is disabled)
1 = Name (if Timer Access [51.43] is enabled)
2 = Status 0 = Off, 1 = On
3 = Events
4 = Hol. Period
5 = Hol. Sched
6 = Pattern Day
4 = Late Work
5 = Weekend Work
6 = Acc. Template
View Weekly Schedule [45.1.1]
Use this option to view the weekly schedules programmed in the Weekly Schedule [65.1]
option.
View Timer Outputs [45.1.2]
Use this option to view the Timer-A and Timer-B outputs with on/off times allocated in the
Timer Outputs [65.2] option.
View Autoset [45.1.3]
Use
A and B to scroll through the groups to select one (optional) and also to view the time
schedule allocated per group.
To Next Page
Loading...
Need help?
General
