Honeywell Mini-AT User Manual

122
www.honeywell.com
Page 122
Mini-AT User Guide
Item
No. Item Name Description
————————————————————————————————————————
222 DAILY CORVOL ALM During a wake cycle, if the computed value for item 223 (DAILY
CORVOL) is greater than the value at item 221 (DAILY
CORVOL LIMIT), an alarm is initiated and is indicated by
placing dots on the LCD and “11111111” at item 222.
“00000000” at item 222 indicates there is no Daily CorVol
Alarm. The alarm and alarm indicators are automatically
cleared at the beginning of each Gas Day, regardless if RBX
(item 165) is enabled or not.
Default = 00000000
223 DAILY CORVOL Same as CORVOL (item 000) but is initialized (re-zeroed) at the
START TIME (item 205) of each Gas Day. If the instrument is
accessed, this item will display the current value for that point in
time.
Default = 00000000
224 DAILY UNCVOL Same as UNCVOL (item 002) but is initialized (re-zeroed) at the
START TIME (item 205) of each Gas Day. If the instrument is
accessed, this item will display the current value for that point in
time.
Default = 00000000
225 INCREMNTL CORVOL Same as CORVOL (item 000) but is initialized (re-zeroed) at the
beginning of every TIME-triggered wake-up (item 202). If the
instrument is accessed, this item will display the current value for
that point in time.
Default = 00000000
226 INCREMNTL UNCVOL Same as UNCVOL (item 002) but is initialized (re-zeroed) at the
beginning of every TIME-triggered wake-up (item 202). If the
instrument is accessed, this item will display the current value for
that point in time.
Default = 00000000

Honeywell Mini-AT Specifications

General

Brand	Honeywell
Model	Mini-AT
Category	Controller
Language	English