Multimedia
Hardware and Software Guide 5–3
Using the Audio-In (Microphone) Jack
The tablet PC is equipped with a stereo microphone jack. When
connecting a microphone to the microphone jack, use a
microphone with a 3.5-mm plug.
â– If you connect a stereo (dual-channel) microphone, stereo
sound will be recorded.
â– If you connect a monaural (single-channel) microphone,
left-channel sound will record on both channels.
â– If you connect a dynamic microphone, the recommended
sensitivity may not be achieved.
✎
When an external microphone is connected to the tablet PC, the
tablet PC internal microphone is disabled.
Using the Audio-Out (Headphone) Jack
Ã…
WARNING: To reduce the risk of personal injury, adjust the volume
before putting on headphones or a headset.
Ä
CAUTION: To prevent possible damage to an external device, do
not
plug a single sound channel (monaural) connector into the
headphone jack.
The stereo (dual-channel) headphone jack is used to connect
headphones, and also to connect the audio input connector of an
audio/video device such as a television or VCR.
When connecting a device to the headphone jack:
â– Use only a 3.5-mm stereo plug.
â– For best sound quality, use 24-ohm to 32-ohm headphones.
✎
When the a device is connected to the headphone jack, the
internal speaker is disabled.
To Next Page
Loading...
Need help?
General
