Power
Hardware and Software Guide 2–29
Recharging the Battery Pack
To recharge the battery pack:
1. Connect the tablet PC to external power and maintain the
connection until the battery pack is fully recharged. The
battery light on the tablet PC is turned
off.
You can use the tablet PC while the battery pack is recharging
but the battery pack will charge faster if the tablet
PC is off.
2. If the tablet PC is off, turn it on when the battery pack is fully
charged and the battery light is turned off.
3. Access the Power Schemes tab by selecting Start > Control
Panel
> Performance and Maintenance > Power
Options
> Power Schemes tab.
4. Refer to the settings you recorded earlier. Reenter the settings
that you recorded for the items in the Plugged In column and
the Running on Batteries column.
5. Select OK.
Ä
CAUTION: After calibrating the battery pack, reenable hibernation.
Failure to reenable hibernation may result in a complete battery drain
and potential data loss.
To reenable hibernation, select Start > Settings > Control Panel >
Performance and Maintenance >
Power Options >
Hibernate tab. Select the Enable hibernation check box, and then
select Apply.
To Next Page
Loading...
Need help?
General
