USB Devices
Hardware and Software Guide 10–3
Operating System and Software
A USB device functions in the same way as a comparable
non-USB device, with one exception. By default, USB devices
do
not function unless an operating system that supports USB
is
installed in the tablet PC.
Some USB devices may require additional support software,
which is usually included with the device. For more information
and software installation instructions, refer to the documentation
included with the device.
USB Legacy Support
You must enable USB legacy support to
■ Use a USB keyboard, mouse, or hub connected to a
USB
connector on the tablet PC during startup or in
a
non-Windows application or utility.
■ Restart from an optional external MultiBay.
To enable USB legacy support:
1. Turn on or restart the tablet PC.
2. Press f10 while the F10 = ROM Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
3. Select Advanced > Device Options.
4. Select Enable USB legacy support.
5. To save your preference and exit Computer Setup, select
File
> Save changes and exit, and then follow the
instructions on
the screen.
To Next Page
Loading...
Need help?
General
