6 Use your HP iPAQ
You can use your HP iPAQ to make and answer calls. You can also make conference calls and dial
international numbers. In addition, you can make data calls, forward calls, and check or modify the
network and channel settings.
Check connection and signal strength
When you slide your SIM card into your HP iPAQ and turn it on, your unit automatically connects to your
service provider's network. The
(Signal strength) icon indicates that you are connected. More vertical
bars indicate a better connection.
Call features
Use the call features on your HP iPAQ to make a call, answer a call, put a caller on hold, access speed
dial, and access voice mail.
NOTE: You might need to contact your service provider to activate and use some of these services.
Make a call
To make a call:
1. Press the
(Answer/Send) key.
2. Use the Dialer screen to dial the number you want to call.
3. Tap Talk.
TIP: You can also make a call by dialing the numbers using the keyboard from the Today screen,
Dialer screen, or Contacts list, and then pressing the
(Enter) key.
Call a contact
You can call a number stored in the contact list. As you enter a contact's name, the HP iPAQ searches
the Contacts, Call History, Speed Dial lists, and the SIM card to find a matching name and number.
Make a call from the Today screen
To make a call from the Today screen:
1. Use the keyboard to enter the contact name or number.
2. If more than one contact exists with the same name, select the appropriate one.
3. Press the
(Answer/Send) key to make the call.
Check connection and signal strength 29
To Next Page
Loading...
Need help?
General
