HP MSR1003-8S User Manual

96
• ntp-service authentication-keyid
• ntp-service reliable authentication-keyid
ntp-service authentication enable
Use ntp-service authentication enable to enable NTP authentication.
Use undo ntp-service authentication enable to disable NTP authentication.
Syntax
ntp-service authentication enable
undo ntp-service authentication enable
Default
NTP authentication is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Enable NTP authentication in networks that require time synchronization security to make sure NTP clients
are synchronized only to authenticated NTP servers.
To authenticate an NTP server, set an authentication key and specify it as a trusted key.
Examples
# Enable NTP authentication.
<Sysname> system-view
[Sysname] ntp-service authentication enable
Related commands
• ntp-service authentication-keyid
• ntp-service reliable authentication-keyid
ntp-service authentication-keyid
Use ntp-service authentication-keyid to set an NTP authentication key.
Use undo ntp-service authentication-keyid to remove the NTP authentication key.
Syntax
ntp-service authentication-keyid keyid authentication-mode md5 { cipher | simple } value
undo ntp-service authentication-keyid keyed
Default
No NTP authentication key is set.
Views
System view

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English