149
[Sysname-poe-profile-abc-1] poe max-power 12000
Related commands
poe max-power(system view)
poe max-power (system view)
Use poe max-power to configure the maximum power for a PSE.
Use undo poe max-power to restore the default.
Syntax
poe pse pse-id max-power max-power
undo poe pse pse-id max-power
Default
The default maximum power of the PSE is 37 watts.
Views
System view
Predefined user roles
network-admin
Parameters
max-power: Sets the maximum power in watts of the PSE. The value range for the SIC-4FSWP is from 37
watts to 87 watts. The value range for the DSIC-9FSWP is from 37 watts to 174 watts.
pse pse-id: Specifies a PSE by its ID.
Usage guidelines
To avoid the PSE power overload situation, make sure the total power of all PSEs is less than the maximum
PoE power.
The maximum power of the PSE must be greater than or equal to the total maximum power of all its
critical PIs on the PSE to guarantee these PIs power.
Examples
# Set the maximum power of PSE 7 to 150 watts.
<Sysname> system-view
[Sysname] poe pse 7 max-power 150
Related commands
poe priority pse
poe pd-description
Use poe pd-description to configure a description for the PD that connects to a PI.
Use undo poe pd-description to restore the default.
Syntax
poe pd-description text
To Next Page
Loading...
Need help?
General
