HP MSR1003-8S User Manual

375
ip netstream aggregation
Use ip netstream aggregation to set a NetStream aggregation mode and to enter the NetStream
aggregation mode view.
Use undo ip netstream aggregation to cancel a NetStream aggregation mode and to remove the
configuration for the NetStream aggregation mode.
Syntax
ip netstream aggregation { as | destination-prefix | prefix | prefix-port | protocol-port | source-prefix
| tos-as | tos-bgp-nexthop | tos-destination-prefix | tos-prefix | tos-protocol-port | tos-source-prefix }
undo ip netstream aggregation { as | destination-prefix | prefix | prefix-port | protocol-port |
source-prefix | tos-as | tos-bgp-nexthop | tos-destination-prefix | tos-prefix | tos-protocol-port |
tos-source-prefix }
Views
System view
Predefined user roles
network-admin
Parameters
as: Specifies the AS aggregation by source AS number, destination AS number, inbound interface index,
and outbound interface index.
destination-prefix: Specifies the destination-prefix aggregation by destination AS number, destination
address mask length, destination prefix, and outbound interface index.
prefix: Specifies the source and destination prefix aggregation by the following criteria:
• Source AS number.
• Destination AS number.
• Source address mask length.
• Destination address mask length.
• Source prefix.
• Destination prefix.
• Inbound interface index.
• Outbound interface index.
prefix-port: Specifies the prefix-port aggregation by the following criteria:
• Source prefix.
• Destination prefix.
• Source address mask length.
• Destination address mask length.
• ToS.
• Protocol number.
• Source port.
• Destination port.
• Inbound interface index.

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English