HP MSR1003-8S User Manual

256
Predefined user roles
network-admin
Usage guidelines
After you enable the Event MIB trap feature, traps are generated when object sampling fails or a trigger
condition is met and sent to the SNMP module. Traps include trigger trap, rising threshold break trap,
falling threshold break trap, trigger-condition detection failure trap, and set-action trigger failure trap.
For more information about traps, see Network Management and Monitoring Configuration Guide.
Examples
# Enable the event MIB trap feature.
<Sysname> system-view
[Sysname] snmp-agent trap enable event-mib
startup (trigger-existence view)
Use startup to specify an existence test type for the first sampling.
Use undo startup to remove the existence test type for the first sampling.
Syntax
startup { absent | present }
undo startup { absent | present }
Default
The existence test types for the first sampling are present and absent.
Views
Trigger-existence view
Predefined user roles
network-admin
Parameters
absent: Specifies the absent test for the first sampling.
present: Specifies the present test for the first sampling.
Usage guidelines
For the first sampling, an event is triggered when the following conditions are met:
• Both the startup and type commands specify the existence test type as present and the monitored
object becomes present at the first sampling. If the monitored objects are wildcarded, the event is
triggered independently for each wildcarded object.
• Both the startup command and type commands specify the existence test type as absent and the
monitored object becomes absent at the first sampling. If the monitored objects are wildcarded, no
event is triggered.
Examples
# Remove the present test configuration for the first sampling.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English