HP MSR1003-8S User Manual

279
Parameters
cipher: Specifies a password in ciphertext.
simple: Specifies a password in plain text. For security purposes, all passwords, including passwords
configured in plain text, are saved in ciphertext.
password: Specifies the password string. This argument is case sensitive. If you specify the simple
keyword, it must be a string of 1 to 255 characters. If you specify the cipher keyword, it must be a
ciphertext string of 33 to 373 characters.
Usage guidelines
You can configure only one password for the ACS to authenticate to the CPE when it initiates a
connection. If you use the command multiple times, the final password configuration takes effect.
For a successful connection, make sure the ACS has the same password setting as the CPE.
If a password is configured, the ACS must provide the correct password when it requests the CPE to
initiate a CWMP session. If the password is incorrect, the CPE denies the connection request from the
ACS.
You do not need to configure this command if you want to disable ACS authentication or authenticate
the ACS only based on its username.
Examples
# Configure the password used for authenticating the ACS.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe password simple newpsw
Related commands
cwmp cpe username
cwmp cpe provision-code
Use cwmp cpe provision-code to configure the provision code of the CPE.
Use undo cwmp cpe provision-code to restore the default.
Syntax
cwmp cpe provision-code provision-code
undo cwmp cpe provision-code
Default
The provision code is PROVISIONCODE.
Views
CWMP view
Predefined user roles
network-admin
Parameters
provision-code: Specifies a provision code, a string of 1 to 64 characters. The string can contain
uppercase letters, digits, and the full stop (.).

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English