172
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the trap queue configuration and usage status.
<Sysname> display snmp-agent trap queue
Queue size: 100
Message number: 6
Related commands
• snmp-agent trap life
• snmp-agent trap queue-size
display snmp-agent trap-list
Use display snmp-agent trap-list to display modules that can generate SNMP notifications and their
notification function status (enable or disable).
Syntax
display snmp-agent trap-list
Views
Any view
Usage guidelines
You can use the snmp-agent trap enable command to enable or disable the notification function of a
module. For a module that has sub-modules, the notification function status is enable if the trap function
of any of its sub-modules is enabled.
Examples
# Display the modules that can generate notification and their notification function status.
<Sysname> display snmp-agent trap-list
Standard notification is enabled.
Enabled notifications: 1; Disabled notifications: 0
Related commands
snmp-agent trap enable
display snmp-agent usm-user
Use display snmp-agent usm-user to display SNMPv3 user information.
Syntax
display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] *
To Next Page
Loading...
Need help?
General
