43
Default
No next hop IPv6 address is configured for the ICMP echo operation.
Views
ICMP echo operation view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the IPv6 address of the next hop. IPv6 link-local addresses are not supported.
Examples
# Specify 10::1 as the next hop IPv6 address for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop ipv6 10::1
no-fragment enable
Use no-fragment enable to enable the no-fragmentation function.
Use undo no-fragment enable to disable the no-fragmentation function.
Syntax
no-fragment enable
undo no-fragment enable
Default
The no-fragmentation function is disabled.
Views
UDP tracert operation view
Predefined user roles
network-admin
Usage guidelines
The no-fragmentation function sets the DF field to 1. Packets with the DF field set cannot be fragmented
during the forwarding process.
You can use this command to test the path MTU of a link.
Examples
# Enable the no-fragmentation function for the UDP tracert operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
[Sysname-nqa-admin-test-udp-tracert] no-fragment enable
To Next Page
Loading...
Need help?
General
