HP MSR1003-8S User Manual

20
Table 6 Command output
Field Description
Index
History record ID.
The history records in one UDP tracert operation have the same ID.
TTL TTL value in the probe packet.
Response
Round-trip time if the operation succeeds, timeout time upon timeout, or 0 if the
operation cannot be completed, in milliseconds.
Hop IP IP address of the node that sent the reply packet.
Status
Status of the operation result:
• Succeeded.
• Unknown error.
• Internal error.
• Timeout.
Time Time when the operation was completed.
display nqa reaction counters
Use display nqa reaction counters to display the current monitoring results of reaction entries.
Syntax
display nqa reaction counters [ admin-name operation-tag [ item-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag.
The admin-name argument represents the name of the administrator who creates the NQA operation.
The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive
string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the
command displays the current monitoring results of reaction entries for all NQA operations.
item-number: Specifies a reaction entry by its ID in the range of 1 to 10. If you do not specify a reaction
entry, the command displays the results of all reaction entries.
Usage guidelines
The result fields display hyphens (-) in one of the following conditions:
• The threshold type is the average value.
• The monitored performance metric is ICPIF or MOS of the voice operation.
The monitoring results of an operation are accumulated, and are not cleared after the operation
completes.

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English