HP MSR1003-8S User Manual

237
Field Descri
p
tion
SampleInstancesHigh
Maximum number of sampled instances.
SampleInstanceLacks
Number of sampling failures after the maximum number of sampling instances is
reached.
Related commands
display snmp mib event
display snmp mib event trigger
Use display snmp mib event trigger to display information about a trigger and the trigger test.
Syntax
display snmp mib event trigger [ owner trigger-owner name trigger-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
owner trigger-owner name trigger name: Specifies a trigger by its owner and name. If you do not specify
a trigger, this command displays information about all triggers and trigger tests.
Examples
# Display information about the trigger with the owner owner1 and the name triggerA and the trigger
tests.
<Sysname> display snmp mib event trigger owner owner1 name triggerA
Trigger entry triggerA owned by owner1:
TriggerComment : triggerA is to monitor the state of the interface
TriggerTest : existence | boolean | threshold
TriggerSampleType : absoluteValue
TriggerValueID : 1.3.6.1.2.1.2.2.1.7.3<ifAdminStatus.3>
TriggerValueIDWildcard : false
TriggerTargetTag : N/A
TriggerContextName : context1
TriggerContextNameWildcard : true
TriggerFrequency(in seconds): 600
TriggerObjOwner : owner1
TriggerObjName : obj1
TriggerEnabled : true
Existence entry:
ExiTest : present | absent
ExiStartUp : present | absent
ExiObjOwner : owner1
ExiObjName : object1

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English