272
Examples
# Specify the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default url http://www.acs.com:80/acs
Related commands
• cwmp acs default password
• cwmp acs default username
cwmp acs default username
Use cwmp acs default username to configure the username for authentication to the default ACS.
Use undo cwmp acs default username to restore the default.
Syntax
cwmp acs default username username
undo cwmp acs default username
Default
No username is configured for authentication to the default ACS.
Views
CWMP view
Predefined user roles
network-admin
Parameters
username: Specifies a username, a case-sensitive string of 1 to 255 characters.
Usage guidelines
You can configure only one username for authentication to the default ACS URL. If you use the command
multiple times, the final username configuration takes effect.
For a successful connection, make sure the CPE has the same username setting as the ACS.
Examples
# Configure the username for authentication to the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default username newname
Related commands
• cwmp acs default password
• cwmp acs default url
cwmp acs password
Use cwmp acs password to configure the password for authentication to the preferred ACS URL.
To Next Page
Loading...
Need help?
General
