70
Examples
# Set the source port number to 8000 for probe packets in the UDP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] source port 8000
statistics hold-time
Use statistics hold-time to set the hold time of statistics groups for an NQA operation.
Use undo statistics hold-time to restore the default.
Syntax
statistics hold-time hold-time
undo statistics hold-time
Default
The hold time of statistics groups is 120 minutes.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view
ICMP/UDP echo operation view
Path/UDP jitter operation view
Predefined user roles
network-admin
Parameters
hold-time: Specifies the hold time in minutes, in the range of 1 to 1440.
Usage guidelines
A statistics group is deleted when its hold time expires.
Examples
# Set the hold time to 3 minutes for statistics groups.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3
statistics interval
Use statistics interval to set the interval for collecting statistics for an NQA operation.
Use undo statistics interval to restore the default.
Syntax
statistics interval interval
undo statistics interval
To Next Page
Loading...
Need help?
General
