397
<Sysname> system-view
[Sysname] ipv6 netstream aggregation as
[Sysname-ns6-aggregation-as] enable
Related commands
ipv6 netstream aggregation
ipv6 netstream
Use ipv6 netstream to enable IPv6 NetStream on an interface.
Use undo ipv6 netstream to disable IPv6 NetStream on an interface.
Syntax
ipv6 netstream { inbound | outbound }
undo ipv6 netstream { inbound | outbound }
Default
IPv6 NetStream is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
inbound: Enables IPv6 NetStream for incoming traffic.
outbound: Enables IPv6 NetStream for outgoing traffic.
Examples
# Enable IPv6 NetStream for incoming traffic on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ipv6 netstream inbound
ipv6 netstream { inbound | outbound } filter
Use ipv6 netstream filter to enable IPv6 NetStream filtering on an interface.
Use undo ipv6 netstream filter to restore the default.
Syntax
ipv6 netstream { inbound | outbound } filter acl acl-number
undo ipv6 netstream { inbound | outbound } filter
Default
IPv6 NetStream filtering is disabled. IPv6 NetStream collects statistics about all IPv6 packets passing
through an interface.
To Next Page
Loading...
Need help?
General
