HP MSR1003-8S User Manual

16
Predefined user roles
network-admin
Parameters
size: Specifies the payload size. Available value ranges include:
• 20 to 8100 bytes for the ICMP echo, UDP echo, or UDP tracert operation.
• 68 to 8100 bytes for the UDP jitter or path jitter operation.
• 16 to 1500 bytes for the voice operation.
Usage guidelines
In ICMP echo and path jitter operations, the command sets the payload size for each ICMP echo request.
In UDP echo, UDP jitter, UDP tracert, and voice operations, the command sets the payload size for each
UDP packet.
Examples
# Set the payload size to 80 bytes for each ICMP echo request.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-size 80
description (any NQA operation type view)
Use description to configure a description for an NQA operation, such as the operation type or purpose.
Use undo description to remove the description.
Syntax
description text
undo description
Default
No description is configured for an NQA operation.
Views
Any NQA operation type view
Predefined user roles
network-admin
Parameters
text: Specifies a case-sensitive string of 1 to 200 characters.
Examples
# Configure the description as icmp-probe for an NQA operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English