52
probe packet-timeout
Use probe packet-timeout to set the timeout time for waiting for a response in the UDP jitter, path jitter,
or voice operation.
Use undo probe packet-timeout to restore the default.
Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
Default
The response timeout time in the UDP jitter or path jitter operation is 3000 milliseconds.
The response timeout time in the voice operation is 5000 milliseconds.
Views
Path jitter operation view, UDP jitter operation view, voice operation view
Predefined user roles
network-admin
Parameters
packet-timeout: Specifies the timeout time in milliseconds. The value is in the range of 10 to 3600000.
Examples
# Set the timeout time to 100 milliseconds for waiting for a response in the UDP jitter operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100
probe timeout
Use probe timeout to set the probe timeout time.
Use undo probe timeout to restore the default.
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view
ICMP/UDP echo operation view
UDP tracert operation view
To Next Page
Loading...
Need help?
General
