HP MSR1003-8S User Manual

278
Related commands
cwmp cpe inform interval
cwmp cpe inform time
Use cwmp cpe inform time to schedule a connection initiation for the CPE to connect to the ACS.
Use undo cwmp cpe inform time to restore the default.
Syntax
cwmp cpe inform time time
undo cwmp cpe inform time
Default
No connection initiation has been scheduled.
Views
CWMP view
Predefined user roles
network-admin
Parameters
time: Specifies the time at which the CPE sends an Inform message. The time format is
yyyy-mm-ddThh:mm:ss, and the value range is 1970-01-01T00:00:00 to 2035-12-31T23:59:59. The
specified time must be greater than the current system time.
Examples
# Configure the CPE to send an Inform message at 2007-12-01T20:00:00.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform time 2012-12-01T20:00:00
cwmp cpe password
Use cwmp cpe password to configure the password for the CPE to authenticate the ACS.
Use undo cwmp cpe password to restore the default.
Syntax
cwmp cpe password { cipher | simple } password
undo cwmp cpe password
Default
No password is configured for authenticating the ACS.
Views
CWMP view
Predefined user roles
network-admin

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English